Case Study - Stuart Bathurst Catholic School, Wednesbury

Airtherm Engineering Limited has recently completed a multiple flue installation at Stuart Bathurst High School, Wednesbury in the West Midlands. The flue product selected was our single wall stainless steel product, used predominantly on fully condensing boiler applications. 

We worked closely with the consultant and contractor Spagas Limited, to ensure a cost-efficient solution. Airtherm also supplied and installed a flue system featuring a horizontal common header. The 12m high vertical stack serves three Broag boilers located in one of the boiler houses in the School.

Stuart Bathurst Catholic High School is a College of Performing Arts, and offers a distinctive Catholic inclusive education based on traditional Christian values and high expectations.

Consultant: Spicer Surveys
 
Client: Spagas Limited
 
Sector: Education
 
Products: MasterFlue System
 
Equipment: Broag Quinta 115
 
Application: Condensing

• Boilers: Broag
• Model: Quinta 115
• Application: Chimney / Flue system
• Operating mode: Wet
• Pressure: Negative / positive pressure
• Working pressure: 200 Pa (product will operate 1000pa max)
• Inner wall: 316L1.4404/1.457 thickness 0.5mm Ø150
• Outer wall: N/a
• Insulation: N/a
• Sealant : Tri-lip 'o' type silicone ring
• Fuel type: Gas

Other Application METALOTERM MasterFlue:

• Condensing boilers
• Chimney liner
• Air inlet & ventilation systems

Other Advantages METALOTERM MasterFlue:

• Stress free thermal expansion
• Can be connected to Metaloterm® MF
• High quality stainless steel system
• High temperature silicone sealing ring
• Universal application
• Fully welded system with sealing ring
• Light weight system

For more information: www.airtherm.co.uk

Read more »

Case Study - Slough Police Station

Airtherm Engineering has completed another installation using Nova commercial product serving two existing Potteron Derwent atmosperic boilers & one Hamworthy water heater at Slough Police station.

Nova is a new breed of chimney system that offers a single solution for virtually all of today's combustion requirements. The system is a true multi-fuel / multi-application product - whether being used to serve a solid fuel stove, vent the latest high efficiency condensing appliances or Biomass wood chip / pellet stove, Nova is the product of choice.

Nova boasts a diameter range covering thirteen sizes and covers domestic and commercial applications. Manufactured from a 316L inner liner, 25mm high density insulated annulus and a grade 304 outer case, Nova is built to last.

Client: Perfect Pipework Ltd
Sector: Public
Products: MasterFlue System
Equipment: Potterton Derwent 
                     Hamworthy DR-LA40
Application: Atmosperic


• Boilers: Potterton Derwent
• Water Heater: Hamworthy DR-LA40
• Application: Chimney / Flue system
• Operating mode: Dry
• Pressure: Negative / Positive pressure
• Working pressure: 200 Pa (product will operate 1000pa max)
• Inner wall: 316L1.4404/1.457 thickness Ø500 1 mm
• Outer wall: AISI 304/ 1.4301 thickness 0,6 mm
• Insulation: 25mm thick Rockwool insulation
• Sealant : Tri-lip 'o' type silicone ring
• Fuel type: Gas
• Suitable for fully condensing applications
• Fully welded construction
• High level insulation
• High thermal resistance
• High speed twist lock jointing system to aid installation
• Without seals the product is suitable for multi fuel applications up to 450°C

Diameters: 100mm - 600mm

Construction: Twin Wall Insulated

Material: 316L stainless steel liner and 304 stainless steel outer case

Temperature: 450°C Continuous without seals 200°C with seals fitted
 
Pressure capability: 200Pa (P1)

Mode of operation: Negative or positive pressure
 
Approvals:
BS EN 1856-1 T460 N1 D V2 L50050 G(50) Nova SM
BS EN 1856-1 T600 N1 D V2 L50050 G(50) Nova SF
BS EN 1856-1 T200 P1 W V2 L50050 O(50) Nova SM c/w seals

For more information: www.airtherm.co.uk

Read more »