Area Sales Engineer Jim Keady initially liaised with both the consultant and the contractor at the early design stage to establish the full requirements for this project.
Airtherm then attended site to complete a survey and based upon our findings a full specification and design proposal was issued to the consultant for consideration. Airtherm were specified by Screen & Partners to carry out the works in conjunction with the nominated contractor Kirkland (Blyth) Limited.
The recent completion of the two twin wall flue systems ran smoothly from start to finish with the client commending our installers: “We would definitely be using Airtherm again in the near future”.
Project Details:
Consultant: Screen & Foster Partners
Contractor: Kirkland (Blyth) Limited
Sector: Leisure
Products: Twin Wall Flue
Equipment: Hoval Ultragas 650D
Application: Condensing
Boilers: Hoval
Model: Ultragas 650D
Application: Chimney / Flue system
Operating mode: Wet
Pressure: Positive pressure
Working pressure: 130 Pa (product will operate 300pa max)
Inner wall: 316L1.4404/1.457 thickness 0,6 mm
Outer wall: 304/ 1.4301 thickness 0,5
Insulation: 30mm thick Rockwool insulation
Sealant: Tri-lip 'o' type silicone ring
Fuel type: Gas
Other Application suited to our DW Flue solutions:
- Condensing boilers
- Atmospheric gas-fired boilers
- Gas blown boilers
- Industrial ovens, large-scale establishments
- Wood-fired stoves
For more information: www.airtherm.co.uk
0 comments:
Post a Comment